Steel cord spools type B40 - B60 - B80
Pressed steel reels for wires and cables
Large size steel reels (also with corrugate flanges)
Collapsible reels
Reels with steel drum and ABS plastic flanges
Fully machined and dynamically balanced reels suitable for high speed applications
A.W.M. S.R.L.
S.S. 13 Pontebbana Km. 146 33010 Magnano in Riviera (UD)
A.W.M. SPA designs and manufactures standard and special electrowelded mesh making plants, standard and special electrowelded lattice girder making plants, automatic mesh bending plants, wire straightening machines, tunnel reinforcement technologies, drawing and col rolling plants, special machines upon request.
Plants for production of square mesh fence, simple twist, 2 and 4 wires
Plants for production of little reels for reinforcement binding, building use
Welding mesh processing plants, standard and special ones
Automatic plants for rotary coiling of wires in small skeins with automatic bindings.
Bb Spring Technology is specialized in the wire machine manufacturing with many years of experience in the industry.
The company designs and builds coiling machines and payoffs to produce compression springs.
The company also provides technical assistance not only for its own machines but also for old coiling machines branded Bobbio
ATE Applicazioni TermoElettroniche has been designing and manufacturing induction heating equipment and plants with related control and supervisory systems since 1987. ATE’s production program includes: Continuous through-heating and heat–treatment plants for wires, bars and tubes; Melting furnaces for ferrous and non-ferrous metals and precious alloys; Heating equipment for induction welding; Induction heating systems for hot assembling; Special applications of induction heating.
CNC Lathes, Notching and Grinding machine for rolling cylinders and roll maintenance.
Steel and Tungsten carbide Rolls for:
- Tube forming;
- Hot and Cold steel rolling;
- Reduction of Heating Elements;
- Copper and Aluminium rolling.
Metallic reels and drums for
the wire and cable industry
Special equipment for reel handling:
take-apart reels, mechanical reel lifters;
electromechanical tilt units; coil lifters;
manual overhead tilter/lifters
Tungsten carbide round wire drawing dies
tungsten carbide shaped wire drawing dies
special profile wire drawing dies
hard metal shoulders for wire drawing
hard metal saddles for drawing
tungsten carbide blanks for wire drawing
tungsten carbide spindles
CVD and PVD coatings
reconditioning service and grinding of worn out dies
Single-die double blow headers for screw blanks Single-die double blow headers for semi-tubular rivets
Single-die double blow headers for fully tubular rivets 2-die 4-blow transfer cold headers for parts with complex shapes 4, 5 and 6 die precision parts formers for parts with extremely complex shapes
Special wire-working machines
High quality production, care for details, Cometo s.n.c. is leader in the production of wire , cable and tube equipment.
The wide production range offers different solutions to satisfy the most demanding customers; the products can be customised according to the specific need of each customer. Straighteners, guides, rollers, feeders , rotating die-holders and the new MTF traightening and cutting machine are only a few of the products Cometo can offer.
Continuous Casting and Rolling lines for the production of Copper rod starting from cathodes and scrap, Al and Al alloys wire rod, Lead and Zinc wire.
Microrolling® mills for rolling Carbon Steel and stainless Steel wire, CO2 welding wire flux core wire and non-ferrous rod. Casting machines producing ingots of non-ferrous metals, Drawing Lines for HC-LC-Stainless Steel-AS wire and PC Strand Lines/Wire Lines.
Fully automatic pickling house of wire rod
Automatic handling for wire rod
Automatic regenerating plant of sulfuric acid
Fumes collection and cleaning equipments
Heating systems: ow or steam
Sludge treatment and drying systems
Waste water treatments plants
Pickling plant equipments process and storage thanks, heating exchangers
Acidproof coatin
Eurotek S.R.L.
Via C.Da Villa Martelli, 313/E 66034 Lanciano (CH)
Manual centering crossheads
Self centering crossheads
Extrusion fooling, standard and special on customer project spare parts for crosshead
Technical assistance design and customer service
Mesh welding machines;
special welding machines;
automatic bending and welding transfer lines;
bending machines and special automatic machines for wire working
Plants for pc wire, pc standard, steel cord, bead wire and ropes, wet and dry drawing lines, machine for strands, ropes and cords, mono-wire and multi-wires coating lines with electrolytic, chemical and hot-dip process.
Pav off and take-up units
Machine and plantsfor welding wires: mig, tig, fcw and electrodes.
Wire rod preparation and wire surface treatment lines.
Environmentally friendly cleaner (Ridoline®), inhibitors (Rodine®), acid pickles, nitric acid free stainless steel pickling process (Cleanox®), zinc, irone and manganese phosphate coatings (Granodraw®, Duridine®),reactive soaps (Stearlube®),
wire drawing lubricants (Steelskin®), cooling emulsions and cutting fluid (Multan®), rolling oils, reactive and non reactive oils (Reactoil®, Reactobond®) for tube drawing, protective coatings and oils, coppering products (Cuprodine®), water treatment chemicals, carrier coatings, engineering solutions and analytical equipments for online monitoring and control of the pretreatment processes (Lineguard®)
Multi-stand tandem rolling mills for round wires and shaped wires.
Multi-stand tandem rolling mills for plates, strips and flattened wires.
Rolling lines for precious metals, special alloys, copper, brass, aluminium, welding wires, brazing alloys, special steels, non-ferrous metals
Rolling forming machine for bi-metallic and tri-metallic profiles, special tubes.
Compact wire train of rolls for small rolling applications
Forming machines for tubes and small dimension profiles, with small/medium capacity
Rolls manufacturing, reproducing, grindind, servicing, repairing for rolling, forming, shearing, cutting applications
Induction Srl, with more than 33 years of experience in the design, construction and installation of inductine heating systems and with more than 1300 plants and key lines installed worldwide, is a reliable partner for any of your projects or application of the heating industry.
We offer our expertise and technologies in all areas of application: heating systems for wires, strands, ropes, ribbons and profiles; multi-wire heating systems; hot molding heating systems; thermal transfer, fusion and iduction welding.
IFP SPA
High Carbon Steel wire
From diam 1.50mm to 17.00mm
Patented and phosphated wire and wire rod
Patented and galvanized wire and wire rod
Patented and zinc aluminium wire and wire rod
Application:
- wires for ropes
- wires for springs
Tungsten carbide drawing dies
Tungsten carbide drawing nibs
Pressure dies
Disposal dies
Machinery and equipment for dies grinding and reconditioning
Tungsten carbide products
Rings, wire guides, electrode bushes, etc.
Technical assistance and personnel training for die grinding equipment
Hard metal sintering process.
Special wire drawing lubricants for ferrous and not ferrous wires (LUBRIFIL®: dry drawing lubricants, powders; LUBRIOL®: wet drawing lubricants, oils and greases). Pre-drawing agents and carriers for carbon and stainless steel (FOSFIL®: phosphating agents; STEELFOR® pre-drawing lubricants carriers). Boron free lubricants and carriers. Inhibitors and special additives.
Vertical rotating capstan take-up frames
(with flat or V-grooved capstans)
Vertical stationary capstan take-up frames
with pattern laying
Horizontal or vertical axis spool pay-off and take-up frames with or without accumulation capstan
Wet drawing machines with spooler
Rolling mills for bars wires and flat
Rolling trains
Proliling machines for welded tubes
Winding machines for tubes
Wire drawing machines
Bar and wire drawing benches
Mario Frigerio S.P.A.
p.o. Box 1 Viale Lombardia Snc, 23847 Molteno (LC)
MEP Group is the leader company for the production of complete plants and machinery for the processing of steel in coil or bar used in reinforced concrete. Stirrups, shaped bars, cut-to-length bars, assembled elements such as precages and cages as well as lattice girders and electrowelded mesh (engineered and standard), make up the range of products which may be obtained from the Group’s machineries.
Specialized in performice weare resistant coatings on.
Mechanical parts for drawing machanocal.
The procucts kerblack ® and wolside ® are renowned worldwide.
Paganoni manufactures mechanical part according to the customers's drawing and restares worn-out capstans with reconstruction of all necessary geo matrical valves.
O.M.A. S.r.l. is a leading manufacturer of braiding for the reinforcing of rubber, thermoplastic, PTFE metal hoses, cable and ropes and ancillary machines like winding machines pay-off and take-up units, yarn/wire spiraling machines, wrapping/unwrapping machines and complete lines for rigid or flexible mandrel rubber hoses.
Designing and construction of plants for:
- fluid-bed coating of wire mesh or wire;
- "bell" fluid-bed coating;
- primer application and fluid-bed coating;
- painting with thermosetting powders;
- anaphoretic and cataphoretic painting;
- dipping painting with liquid paint;
- painting of plastic materials;
- belt or revolving drum washing;
Steel in wire rod and bars for:hot or cold heading application fastenersprings and torsion bars chains welding wirehardening and temperingCase hardeningFree cutting steel gradeswire rod (5,5-38mm) avaible: as rolled annealed pickled conditionsbars (18-45mm) avaiable as rolled, Q&T
Officina Meccanica Trinca Colonel Silvio & Figlio Sergio S.N.C.
Automatic bending machines for the cold deformation of metallic wire and/or strip.
Mechanic machines
(serie uno-serie due-serie tre)
Cnc electronic machines (serie ceb)
Combined machines (serie bmx-bmh) machines for the construction of welded rings (serie mea-serie esab)
Optimized module for the welding-hole-deburring rivet-threading-manipulation-robot
Electronic decoilers capacity from 50 to 3000 Kg
Here at Otomec we are specialists into Engineering and Manufacturing of equipment for the cleaning and plating of metallic wire, strip, bar and tube.
Tin / nickel / silver of copper wire for cable. Zinc and copper plating of steel wire. Zinc nickel alloy on steel. Copper on aluminium wire and strip. Zinc on brass EDM wire. Chrome, zinc, tin plating of steel, copper bars.
Engineering adn costruction of machines for steel wire such as drawing lines, cold rolling lines, special machines, automatic spoolers, cold rolling cassettes
PS Costruzioni Meccaniche has been designing and manufacturing both semi-automatic and fully automatic coiling/spooling lines, as well as rewinding lines and take up, since 1960
Complete enamelling lines for round and rectangular wires CU/AL
Complete insulating lines for Fiberglass / Klapton / Mica / PTFE
Special enamelling machines for fluoroplastic application
Ovens for special enamel application and curing
Natural diamond, PCD and monocrystalline dies round and shaped.
Die refurbishing machines.
Enameling dies with insert in both diamond and tungsten carbide.
Design, manufacturing of enameled wire testing equipment according to the most international regulation such: IEC60851, NEMA MW 1000, JIS 3003 etc or according to the customer requirements
Cold forging, warm forging, screw and bolt making machines to cover a range of sizes from M3-M27 with shank lenght up to 300mm
Double blow headers with thread rolling
4-5-6 die (medium stroke) progressive headers
4-5 die (long stroke) progressive headers
4-5-6 die (medium stroke) combined headers, with pointing and
thread rolling
4-5 die (long stroke) combined headers with pointing and
thread rolling
4-5 die "Warm Forming" system
Founded in 1936, Samp offers the most complete wire and cable production program worldwide from rod breakdown to drawling lines for copper and aluminium, from bunching machines to extrusion lines for telecom, automotive (LV) and power cables (MHV)
Combined lines to draw bars and tubes
Chain pulling benches to draw bars and tubes
Profiles straightening lines
Eddy current lines
Entry drawing lines service
Exit drawing lines service
Company specialized in the production of high technology plants for the insulating enmelling of the aluminum and copper wire, with all the necessary accessories, rod break down machine, laboratory tester and multiwire drawing machines
Company manufacturing machines for spring makers: spring coiling and torsioning machines, power swifts (pay-offs), spring joining machines, tool grinders, straightening and cutting machines, tool grinders, straightening and cutting machines for wire and tube coiled in bundles
Project and building of machines for fasteners production and special machines: flat dies machines, rotary machines, washer assembly units, chainfencing machines, 2 rolls machines, check control carousers, loading elevators and special machines
Lubricants and chemical products for wire
drawing and metal working
Tecnolubre powder lubricants for dry drawing
Sintek oils and liquid compounds for wet drawing
Tecnofix pastes, greases and
compouns for wire drawing
Tecnoline products for preparing wire rods
and wires for drawing
Tecnolam products for wire rod and wire rolling
Tenolux products for cleaning
and degreasing wires
Airprotector/Cuprotector products for protecting ferrous and non-ferrous wire rod and wire against corrosion
Tenova is a worldwide supplier of advanced technologies, products, and services for the iron&steel and mining industries providing innovative, integrated solutions for complete process areas
Vertical and Horizontal Taping, Spinning and Binding Lines.
Winding, Rewinding Lines & single Take-ups and Pay-offs.
Single Twisting Lines with traditional and high speed
concentric Backtwist Feeders. Accessory and equipment
for cable industries. Revamping of existing equipment.
Manufacturing of spare parts and technical assistance fore wire and cable making machines. Maintenance and revamping of lines/machinery with CE marking and certification, according to ev directives.
WIRE&CABLE Verona 20-21 oct. 2019 Wire and cable Verona.pdf... continue
You can receive our news letter by writing your e-mail address in the special blank area
ACIMAF
Segreteria / Secretariat Office
Corso Italia, 45 - I 20122 Milano (Italy)
Telefono:(+39) 02/541.253.01
Fax:(+39) 02/541.208.25
E-Mail:
Web: www.acimaf.com
